$226.62
ISM2340-240
Alt: AMCI by IDEC, Non-Cancellable, No Returns
$285.75
Stepper Motor, Size 23, 240 Oz-In Motor w/ Single Shaft, NCNR
- Weight:
- 2.20 LBS
- Minimum Purchase:
- 1 unit
Description
Many users are frustrated by the complexity and high cost of implementing a motion control system. IDEC and AMCI (an established motion control system supplier) partnered to offer a simple stepper motion control system!
Use these steppers with Idec FC6A PLC's.
The IANF2 controllers offer two independent motion control axes that function in open loop configuration (or in closed loop using the available encoder feedback). Each axis can drive a stepper or a servo with step/direction input capability! The ANF2 can synchronize its two axes allowing you to control linear and circular motions in an XY plane.
AMCI-IDEC IANF2 expansion modules allow you to easily interface up to 12 motion axes using a single network connection which reduces physical wiring and streamlines network traffic.
No other product rivals the flexibility, performance, and value of AMCI-IDEC IANF2 Motion Controllers!
Our IDEC by AMCI product line includes controllers, stepper motors, a combo controller+drive, a combo drive+steper motor and the 3-in-1 controller+drive+stepper motor.
- Controller (IANF2) - a 2-axis motion controller that is expandable up to 12 axes. It can accept encoder feedback which provides stall detection and move verification. The controller includes 6 discrete inputs and 4 discrete outputs.
- Drive + Controller (IANG1) - the integrated stepper controller + drive combo is a new approach to PLC-based motion control systems! This system can be expanded up to 6 axes.
- Stepper Motor (ISM2340) - Available in standard NEMA 23 frame sizes with output torque rating of 130 and 240 oz-in.
- Stepper Motor + Drive (ISMD23) - This motor-drive combo can control one to six axes of motion plus it combines the features of the two-axes controller and the drive into a single unit!
- Stepper Motor + Drive + Controller (ISMD23E) - Gives you all-in-one-motion control with all the features of the two-axis controller, drive and stepper motor.
Learn more about the IDEC by AMCI partnership and products here.
Marshall Wolf Automation is your authorized IDEC distributor, in-house tech support is readily available.
Features Include:
- NEMA Size: 23
- Holding Torque: 240 oz-in
- Parallel Current: 4 A
- Motor Length: 3.00"
- Rotor Inertia: 5.1 x10-3oz-in-sec2
- Superior speed and torque range
- Industry-leading warranty and support
- 100% compatible with entire line of AMCI-IDEC stepper motor drives and controllers
- Read more: Blog on Stepper Motors
Need More Information?
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Werma
240-240-55
Tricolor LED Beacon, Red/Green/Yellow, Continuous, 24VDC, 85dB, Clear Dome, Black Housing, M12 Plug, IP65, Buzzer, 55mm x 46mm, MC55 Series
$100.83
$589.72
$767.15
Werma
240-210-55
Multicolor Beacon, LED, 24VDC, Cable, 7 Color, IP65, No Buzzer, 55mm x 46mm, MC55 Series
$72.37
Werma
240-230-55
Tricolor LED Beacon, Red/Green/Yellow, Continuous, 24VDC, 85dB, Clear Dome, Black Housing, Cable, IP65, Buzzer, 55mm x 46mm, MC55 Series
$91.60
Werma
649-240-02
Light Tower, Ø70mm, LED Steady, 24VAC/DC, Red/Yellow/Green, Base/Bracket Mount, IP65, Pre Assembled
$196.15
Werma
649-240-06
Light Tower, Ø70mm, LED Steady, 24VAC/DC, Red/Green, Pole Mount, IP65, Pre Assembled
$172.93
Werma
240-440-55
Tricolor LED Beacon, Red/Green/Yellow, 24VDC, Plug M12, IP69K, UL Approval, Buzzer, 55mm x 46mm, MC55 Series
$79.02