125DV-C-2A
dart_125series_870x630_5__60601.jpg

Product image is representative only, please verify specifications.

Dart Controls

125DV-C-2A

Alt: 125 Series Available Until 2024, Please Consider Using the 150 Series

$152.60

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, Adjustable Linear ACCEL and

Weight:
1.00 LBS
Minimum Purchase:
1 unit
Adding to cart… The item has been added
This series is being phased out and replaced by the 150 series, please see below.
dart_125series_870x630_5__60601.jpg
dart_125series_870x630_5__60601.jpg
Description

June 2022: Dart Controls has announced that their popular 125D series will be discontinued. The replacement is the 150 series which has many additional features!

  • Existing customers can continue to order the 125D through Q1 of 2023
  • Starting in Q1 of 2023 everyone will be asked to make the switch to the 150 series (information below)
  • January 1st, 2024 the 125D series will no longer be available

The Dart Controls 150 series is a better control that offers more features and higher performance:

  1. Drop-in replacement - same size, mounting method and mounting hole dimensions
  2. Accel/Decel adjustment was an option (-2A) on the 125D, it is a standard feature on the 150 series
  3. True dual voltage - the 150 series allows for 90VDC output from BOTH 115VAC and 230VAC supply
  4. Fusing option - 1 or 2 fuse holders may be added and mounted to the 150 series
  5. Choice of wire termination - 1/4" male QC terminals are standard, euro style terminal strip optional

 

About the 125D series:

The 125 series is a compact, cost effective and reliable SCR drive. SCR drives convert single phase line voltage (120/240VAC) into full-wave rectified DC for use with both DC permanent magent and shunt or field wound DC motors. Designed and built in the USA!

Installation and field adjustments are facilitated using a barrier type terminal strip and large, easily adjusted trimpots. Adjustable horsepower range: 120 VAC; 1/50–1/8 and 1/8–1/2; 240 VAC; 1/25–1/4 and 1/4–1. The 125D-C model operates on a low input voltage of 24/36 VAC with an output of 150mA–5.5 ADC.

Standard features include an inhibit circuit for star t-stop operation and 1% speed regulation over a 50:1 speed range. Dual voltage 120/240 VAC or 24/36 VAC models are available.

Long life and quality are assured by 100% full load testing. The 125 Series is ideal for applications such as: office machinery, conveyors, of ice packaging equipment, printers, process equipment, centrifuges, and exercise equipment.

SCR drives control motor speed by adjusting the voltage output of the motor. SCR drives are the workhouse of the variable speed DC motor industry!

  • Dual Voltage 120/240 VAC, 50/60Hz
  • Designed and built in the USA!
  • Adjustable horsepower settings
  • Barrier terminal strip
  • Full wave bridge supply
  • 1% speed regulation, ±1/2% with tach feedback
  • Adjustable Minimum speed
  • Adjustable Maximum speed
  • Adjustable IR Compensation
  • Adjustable Current Limit
  • Fixed Acceleration
  • Optional Adjustable Acceleration
  • Line voltage compensation
  • 5K ohm speed pot, knob & dial plate included
  • 50:1 speed range
  • Overload capacity: 200% for one minute
  • Transient voltage protection
  • Voltage following mode
  • Inhibit circuit
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Add Selection to Cart
Available Now!
dart_125series_870x630_1_1__23494.jpg

Dart Controls

125DV-C

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, 0.5 Sec Acceleration

$125.30
dart_125series_870x630_6__44721.jpg

Dart Controls

125DV-C-15C

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, 1 sec Accel

$145.60
dart_-_125dv-c-1_-_speed_control_1__83570.jpg

Dart Controls

125DV-C-1

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, 0.5 Sec Acceleration

$152.60
dart_125series_870x630_2__75334.jpg

Dart Controls

125DV-C-7

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, Isolated 4-20mA Signal Follo

$236.60
Available Now!
dart_125series_870x630__10909.jpg

Dart Controls

125DV-C-K

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, Fixed Acceleration Rate of 6 Seconds

$125.30
Available Now!
dart_125series_870x630_4__15082.jpg

Dart Controls

125DV-C-5

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, Isolated 4-20mA Signal Follower Input

$229.60
dart_125series_870x630_3__12700.jpg

Dart Controls

125DV-C-55H

DC Speed Control, 120/240VAC Input, 0-90/180VDC Output Adjustable Range, 1/8 to 1/2hp (90V), 1/4 to 1hp (180V), 1% Speed Deregulation Over a 50:1 Speed Range, Control for PM, Shunt Wound DC and Universal Motors, Isolated Voltage Follower, 0

$243.60
idec_hw4k-2a_870x630_9__21683.jpg

IDEC

HW4K-2A

Selector Switch, Operator, Metal, 2-Position, Maintained

$22.37
idec_hw1k-31b_870x630_8__22803.jpg

IDEC

HW1K-2A

Selector Switch, Operator, Plastic, 2-Position, Maintained

$21.46
Add Selection to Cart
!
✓