Description
Single&Double Hole Weld Point Detector Transmitter
Features Include:
- Transmitter: SWD60T
- Receiver: SWD60R
- Detection Distance: 250-1000 mm between transmitter and receiver (500 mm recommended)
- Effective Detecting Width: 470mm
- Light Source: Infrared LED
- Light-Sensitive Element: Silicon photodiode
- Power Supply: Supplied by controller (24 VDC (20-30 V), ripple 10% or less)
- Current Consumption: Transmitter: 280 mA or less; Receiver: 210 mA or less
- Ambient temperature: -25°C to 55°C (below 80 C with water cooling)
- Storage temperature: -40°C to 70°C (Non-freezing)
- Ambient humidity: 35 - 85%RH (Non-condensing)
- Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
- Shock: 500 m/s2 / 3 times each in 3 directions
- Connection: Metal connector (cable: 2 m)
- Dielectric withstanding: 1000 VAC for 1 minute
- Insulation resistance: 500 VDC, 20 MΩ or higher
Weight:
- Transmitter: Approx. 2.6 kg (including 2m cable)
- Receiver: Approx. 2.9 kg (including 2m cable)
- Air purge unit: Approx. 0.3 kg
- Water cooling jacket: Approx. 1.7 kg