-
Noark
Ex9CK32B30Y7
DP (Definite Purpose) Contactor, Lug Terminals, 32 Amp (32A), 3NO, 600VAC, 50/60Hz, Ex9CK Series
$26.61$26.61 -
Noark
Ex9CK40A10B7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 24VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10E7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 48VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10F7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 110VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10G7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 120VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10M7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 220VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10N7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 277VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10P7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 230VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10Q7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 380VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10R7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 440VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10T7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 480VAC, 50/60Hz, Ex9CK Series
$13.77$13.77 -
Noark
Ex9CK40A10U7
DP (Definite Purpose) Contactor, Screw Terminals, 40 Amp (40A), 1NO + 1 Shunt, 240VAC, 50/60Hz, Ex9CK Series
$13.77$13.77
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors