-
Weg
CWB95-11-30D02
Contactor, IEC, 95 Amp (95A), 3NO, 24VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$142.35$142.35 -
Weg
CWB95-11-30D15
Contactor, IEC, 95 Amp (95A), 3NO, 120VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$142.35$142.35 -
Weg
CWB95-11-30D24
Contactor, IEC, 95 Amp (95A), 3NO, 230VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$142.35$142.35 -
Weg
CWB95-11-30D39
Contactor, IEC, 95 Amp (95A), 3NO, 480VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$142.35$142.35 -
Weg
CWB95-11-30D77
Contactor, IEC, 95 Amp (95A), 3NO, 208VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$142.35$142.35 -
Weg
CWB95-11-30E04
Contactor, IEC, 95 Amp (95A), 3NO, 24-60VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$175.50$175.50 -
Weg
CWB95-11-30E65
Contactor, IEC, 95 Amp (95A), 3NO, 110-255VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$175.50$175.50 -
Weg
CWBN0-11-30D15
Contactor, NEMA, 18 Amp (18A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 120VAC Coil, 50/60Hz, Screw Terminal, 3.09 x 1.77 x 5.30" (78.4 x 45 x 134.6mm) (HWD)
$46.02$46.02 -
Weg
CWBN0-11-30D39
Contactor, NEMA, 18 Amp (18A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 480VAC Coil, 50/60Hz, Screw Terminal, 3.09 x 1.77 x 5.30" (78.4 x 45 x 134.6mm) (HWD)
$46.02$46.02 -
Weg
CWBN0-11-30V24
Contactor, NEMA, 18 Amp (18A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 180-208VAC, 50Hz / 208-240VAC, 60Hz, Screw Terminal, 3.09" x 1.77" x 5.30" (78.4mm x 45mm x 134.6mm) (HWD)
$46.02$46.02 -
Weg
CWBN00-11-30C03
Contactor, NEMA, 9 Amp (9A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 24VDC Coil, Screw Terminal, 3.09 x 1.77 x 4.95" (78.4 x 45 x 125.8mm) (HWD)
$58.50$58.50 -
Weg
CWBN00-11-30D15
Contactor, NEMA, 9 Amp (9A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 120VAC Coil, 50/60Hz, Screw Terminal, 3.09 x 1.77 x 5.30" (78.4 x 45 x 134.6mm) (HWD)
$40.17$40.17
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors