-
Carlo Gavazzi
CGT-12M-10
Overload Relay, Thermal, Miniature, Class 10 Bimetallic Overload for CGMS Contactors, Motor Protection Range 7-10 Amps (TOR 12M 7-10)
$38.40$38.40 -
Carlo Gavazzi
CGT-12M-2.5
Overload Relay, Thermal, Miniature, Class 10 Bimetallic for CGMS Contactors, Motor Protection Range: 1.6-2.5 Amps (TOR 12M 1.6-2.5)
$38.40$38.40 -
Available Now! Available Now!Carlo Gavazzi
CGT-12M-4.0
Overload Relay, Thermal, Miniature, Class 10 Bimetallic Overload for CGMS Contactors, Motor Protection Range 2.5-4 Amps (TOR 12M 2.5-4)
$38.40$38.40 -
Weg
CWB110-11-30D02
Contactor, IEC, 110 Amp (110A), 3NO, 24VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D15
Contactor, IEC, 110 Amp (110A), 3NO, 120VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D24
Contactor, IEC, 110 Amp (110A), 3NO, 230VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D39
Contactor, IEC, 110 Amp (110A), 3NO, 480VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D77
Contactor, IEC, 110 Amp (110A), 3NO, 208VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30E04
Contactor, IEC, 110 Amp (110A), 3NO, 24-60VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$214.50$214.50 -
Weg
CWB110-11-30E65
Contactor, IEC, 110 Amp (110A), 3NO, 110-255VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$214.50$214.50 -
Weg
CWB12-11-30C07
Contactor, IEC, 12A, 3 NO Pole, 48VDC Coil, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Available Now! Available Now!Weg
CWB12-11-30D02
Contactor, IEC, 12A, 3 NO Pole, 24VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$32.96$32.96
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors