-
Noark
Ex9CK20B10Q7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 1NO + 1 Shunt, 380VAC, 50/60Hz, Ex9CK Series
$11.05$11.05 -
Noark
Ex9CK20B10R7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 1NO + 1 Shunt, 440VAC, 50/60Hz, Ex9CK Series
$11.05$11.05 -
Noark
Ex9CK20B10T7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 1NO + 1 Shunt, 480VAC, 50/60Hz, Ex9CK Series
$11.05$11.05 -
Noark
Ex9CK20B10U7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 1NO + 1 Shunt, 240VAC, 50/60Hz, Ex9CK Series
$11.05$11.05 -
Noark
Ex9CK20B10Y7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 1NO + 1 Shunt, 600VAC, 50/60Hz, Ex9CK Series
$11.05$11.05 -
Noark
Ex9CK20B20B7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 24VAC, 50/60Hz, Ex9CK Series
$12.84$12.84 -
Noark
Ex9CK20B20E7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 48VAC, 50/60Hz, Ex9CK Series
$12.84$12.84 -
Noark
Ex9CK20B20F7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 110VAC, 50/60Hz, Ex9CK Series
$12.84$12.84 -
Noark
EX9CK20B20G7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 120VAC, 50/60Hz, Ex9CK Series
$12.84$12.84 -
Noark
Ex9CK20B20M7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 220VAC, 50/60Hz, Ex9CK Series
$12.84$12.84 -
Noark
Ex9CK20B20N7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 277VAC, 50/60Hz, Ex9CK Series
$12.84$12.84 -
Noark
Ex9CK20B20P7
DP (Definite Purpose) Contactor, Lug Terminals, 20 Amp (20A), 2NO, 230VAC, 50/60Hz, Ex9CK Series
$12.84$12.84
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors