-
Available Now! Available Now!Weg
CWB32-11-30D39
Contactor, IEC, 32A, 3 NO Pole, 480VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$54.60$54.60 -
Weg
CWB38-11-30D39
Contactor, IEC, 38A, 3 NO Pole, 480VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$63.96$63.96 -
Weg
CWB40-11-30D39
Contactor, IEC, 40A, 3 NO Pole, 480VAC Coil, 50-60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$63.96$63.96 -
Weg
CWB50-11-30D39
Contactor, IEC, 50A, 3 NO Pole, 480VAC Coil, 50-60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$87.75$87.75 -
Weg
CWB65-11-30D39
Contactor, IEC, 65A, 3 NO Pole, 480VAC Coil, 50-60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$99.45$99.45 -
Weg
CWB80-11-30D39
Contactor, IEC, 80A, 3 NO Pole, 480VAC Coil, 50-60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$105.30$105.30 -
Weg
CWB95-11-30D39
Contactor, IEC, 95 Amp (95A), 3NO, 480VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$142.35$142.35 -
Weg
CWBN0-11-30D39
Contactor, NEMA, 18 Amp (18A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 480VAC Coil, 50/60Hz, Screw Terminal, 3.09 x 1.77 x 5.30" (78.4 x 45 x 134.6mm) (HWD)
$46.02$46.02 -
Weg
CWBN00-11-30D39
Contactor, NEMA, 9 Amp (9A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 480VAC Coil, 50/60Hz, Screw Terminal, 3.09 x 1.77 x 5.30" (78.4 x 45 x 134.6mm) (HWD)
$40.17$40.17 -
Weg
CWBN1-11-30D39
Contactor, NEMA, 25 Amp (25A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 480VAC Coil, 50/60Hz, Screw Terminal, 3.35 x 1.77 x 4.02" (85 x 45 x 102.2mm) (HWD)
$63.96$63.96 -
Weg
CWBN2-11-30D39
Contactor, NEMA, 50 Amp (50A), 1NO/1NC Auxiliary Contacts, 3NO Power Pole, 480VAC Coil, 50/60Hz, Screw Terminal, 4.53 x 2.13 x 4.75" (115 x 54 x 120.7mm) (HWD)
$90.87$90.87 -
Weg
CWC012-00-22V47
Mini Contactor, 12 Amp, 2NO/2NC Power Poles, 400-415V 50Hz/480V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$18.60$18.60
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors