PM0102
teco-maxpm-gen_1_13__15402.jpg

Product image is representative only, please verify specifications.

Teco Westinghouse

PM0102

Alt: MAX-PM Series

$1,136.46

Motor, 10hp, 3600rpm, 230/460V, 215T Frame, TEFC Enclosure, IP55, Super Premium Efficiency Permanent Magnet Motors, MAX-PM (PMAC Motor), (Cannot Ship UPS, Drop Ship Only Via Truck)

Weight:
107.00 LBS
Minimum Purchase:
1 unit
Adding to cart… The item has been added
image
Configure Your Optimal AC Drive Solution
Build a complete solution with expert guidance on AC drives and compatible components including motors, circuit breakers and protection equipment
image
Configure Your Motor Starter Solution
Configure your DOL motor starter solution with guided selection of protection and control components: starters, contactor, relays and accessories
teco-maxpm-gen_1_13__15402.jpg
teco-maxpm-gen_1_13__15402.jpg
Description
TECO-Westinghouse manufacturers motors, variable frequency drives and soft starters.
 
In 1995 TECO acquired all Westinghouse Electric Corp. shares and in 1997 the name was officially changed to TECO-Westinghouse Motor Company (TWMC). They are headquartered in Round Rock, Texas.
 
After acquiring Motovario, TECO also has a line of gearmotors.
Specifications
Frame 215T
Horsepower 10 hp
Mounting Footed, C Face
Motor Type TEFC, Cast Iron
Phase Three Phase
All - Specific Ratings IP55
RPM 3600
Series MAX-PM Series
All - Voltage 230/460VAC
Warranty 3 Years
Alternate Part Number MAX-PM Series
Weight 107

Features Include:

  • Voltage: 230/460
  • Output Range: 10 HP
  • RPM Rated: 3600
  • Frame Size: 215T
  • Time Duty Continuous, Service Factor: 1.0 (S1)
  • Protection Enclosure Totally Enclosed: (IP55)
  • Mounting Horizontal Foot Mounting: F-1 (IM 1001)
  • Cooling Method: Frame-Surface Cooled with a Fan (IC 411)
  • Power Condition: Voltage: ±10%, Frequency: ±5%, and ±10% of Combined Voltage and Frequency, but frequency variation does not exceed ±5%
  • Starting Method: Controlled by Permanent Magnet Synchronous Motor Inverter
  • Direction of Rotation: Bi-Directional
  • Drive Method: Direct Coupling Service
  • Placement Recommendation: Shadow, Non-Hazardous
  • Ambient Temperature: -20˚C~40˚C
  • Relative Humidity: Less than 90% RH (Non-Condensation)
  • Altitude: Less than 3,300 ft
  • Frame: High Grade Cast Iron with 2 Drain Holes at Bottom
  • End Bracket: High Grade Cast Iron
  • External Fan: Plastic
  • Fan Cover: Pressed Steel
  • Shaft: Carbon Steel, Cylindrical Single Extension with Keyseat and Key
  • Bearing: Grease Pre-Packed, Shielded Rolling Bearings
  • Lubricant: Mineral Oil, Li-Base Grease (MULTEMP SRL)
  • Shaft: Flinger V-Ring on Both Ends
  • Terminal Box: Pressed Steel, Larger Size, Can be Set 90° Apart, with Clearance
  • Hole: Cable Entrance, F-1 & F-2 Interchangeable
  • Stator Insulation: Class F Insulation System
  • Rotor Structure: Permanent Magnet NdFeB
  • Painting System: Phenolic Rust Proof Base Plus Lacquer Surface Finished
  • Color: Green (Munsell 10GY 5/12)
  • Temperature: Rise Not to Exceed 80˚C for 1.0 Service Factor by Resistance Method
  • Over Torque: 150% Rated Torque for 60 Seconds
Downloads
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Add Selection to Cart
teco-maxpm-gen_25__52995.jpg

Teco Westinghouse

PM0102C

Motor, 10hp, 3600rpm, 230/460V, 215TC Frame, 91.7% FL Efficiency, 14 FL Amps (460V), 3 Phase, TEFC, Footed, IP55, Super Premium Efficiency Permanent Magnet Motors, MAX-PM™ (PMAC Motor) (Drop Ship Only Via Truck)

$1,233.75
Add Selection to Cart
Blogs

Featured Items

Loading products...
!
✓