Teco Westinghouse
PM0024C
Motor, 2hp, 1800rpm, 230/460V, 145T Frame, TEFC Enclosure, IP55, Super Premium Efficiency Permanent Magnet Motors, MAX-PM (PMAC Motor)
$618.99
Product image is representative only, please verify specifications.
PM0024
Alt: MAX-PM Series
$573.40
Motor, 2hp, 1800rpm, Three Phase, 230/460V, 145T Frame, 88.2% FL Efficiency, 3 FL Amps (460V), TEFC Enclosure, Footed, IP55, Super Premium Efficiency Permanent MagnetMotors, MAX-PM™ (PMAC Motor)
- Weight:
- 46.00 LBS
- Minimum Purchase:
- 1 unit
Configure Your Motor Starter Solution
Configure your DOL motor starter solution with guided selection of protection and control components: starters, contactor, relays and accessories
Description
TECO-Westinghouse manufacturers motors, variable frequency drives and soft starters.
In 1995 TECO acquired all Westinghouse Electric Corp. shares and in 1997 the name was officially changed to TECO-Westinghouse Motor Company (TWMC). They are headquartered in Round Rock, Texas.
After acquiring Motovario, TECO also has a line of gearmotors.
Specifications
Frame
145T
Horsepower
2 hp
Mounting
Footed, C Face
Motor Type
TEFC, Cast Iron
Phase
Three Phase
All - Specific Ratings
IP55
RPM
1800
Series
MAX-PM Series
All - Voltage
230/460VAC
Warranty
3 Years
Alternate Part Number
MAX-PM Series
Weight
46.0000
Features Include:
- Voltage: 230/460
- Output Range: 2 HP
- RPM Rated: 1800
- Frame Size: 145T
- Time Duty Continuous, Service Factor: 1.0 (S1)
- Protection Enclosure Totally Enclosed: (IP55)
- Mounting Horizontal Foot Mounting: F-1 (IM 1001)
- Cooling Method: Frame-Surface Cooled with a Fan (IC 411)
- Power Condition: Voltage: ±10%, Frequency: ±5%, and ±10% of Combined Voltage and Frequency, but frequency variation does not exceed ±5%
- Starting Method: Controlled by Permanent Magnet Synchronous Motor Inverter
- Direction of Rotation: Bi-Directional
- Drive Method: Direct Coupling Service
- Placement Recommendation: Shadow, Non-Hazardous
- Ambient Temperature: -20˚C~40˚C
- Relative Humidity: Less than 90% RH (Non-Condensation)
- Altitude: Less than 3,300 ft
- Frame: High Grade Cast Iron with 2 Drain Holes at Bottom
- End Bracket: High Grade Cast Iron
- External Fan: Plastic
- Fan Cover: Pressed Steel
- Shaft: Carbon Steel, Cylindrical Single Extension with Keyseat and Key
- Bearing: Grease Pre-Packed, Shielded Rolling Bearings
- Lubricant: Mineral Oil, Li-Base Grease (MULTEMP SRL)
- Shaft: Flinger V-Ring on Both Ends
- Terminal Box: Pressed Steel, Larger Size, Can be Set 90° Apart, with Clearance
- Hole: Cable Entrance, F-1 & F-2 Interchangeable
- Stator Insulation: Class F Insulation System
- Rotor Structure: Permanent Magnet NdFeB
- Painting System: Phenolic Rust Proof Base Plus Lacquer Surface Finished
- Color: Green (Munsell 10GY 5/12)
- Temperature: Rise Not to Exceed 80˚C for 1.0 Service Factor by Resistance Method
- Over Torque: 150% Rated Torque for 60 Seconds
Downloads
- Teco Westinghouse Beyond Premium Efficiency Motor Solutions Flyer
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Brochure
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Datasheet
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Performance Data
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Sales Document
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.