JT10R

Photoelectric Sensor, Through Beam, Red LED, 24/240VAC/DC, 10000mm Range, Relay, Terminal Block

Features Include:

• Detection Method: Through beam
• Detection Distance: 10m
• Detection Object: Opaque object of dia.16 mm min of object
• Current Consumption: 25mA or less
• Power Supply: 24-240V AC/DC ±10‚àö√Ƭ¨‚à´‚àö√± 50/60Hz
• Power Consumption: Transmitter/Receiver 2 W or less
• Output Mode: Relay output 1a / Rating: 2 A (250 VAC) or less resistance load
• Operating Angle: 5% (at receiver)
• Response Time: 5ms or less
• Light source (light wavelength): Red LED
• Volume: Delay time adjustment (at receiver)
• Material: Case : Acrylic
• Connection: Terminal block (with M3.5 screws)
• Weight: Transmitter/Reflector Approx. 250 g

Operation Mode:

• *Light ON/Dark ON selectable
• *Timer function selectable between on delay, off delay, one shot and timer disabled (with switch)
• Delay time: 0.1-1 s, 1-10 s

Indicator: 

• Transmitter P.L: power indicator (red LED)
• Receiver OP.L: operation indicator (red LED)
• STB: stability indicator (green LED)

Environmental Specifications:

• Ambient Light: 10,000 lx or less
• Ambient Temperature:-25 - +55°C (non-freezing)
• Ambient Humidity: 35 - 85%RH (non-condensing)
• Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
• Shock: 500 m/s2 / 3 times each in 3 directions
• Dielectric withstanding: 1,500 VAC for 1 minute
• Insulation resistance: 500 VDC, 100 MΩ or higher

Need More Information?

• Takex J Series AC/DC Power Supply Photo Sensors Datasheet
• Takex AC/DC Power Supply Photo Sensors Catalog
• Takex America Inc. Training Manual