KD50W
Alt: Being Phased Out, Available Only While Stock Lasts!
$1,009.54
Sensor, Wide View, Water-Cooled HMD, Infrared Radiation Detection, 100 to 110VAC/200 to 220VAC ±10%％ 50/60Hz, 450°C or more, Relay output 1c, 25ms or less, Terminal Block Connection, IP66
- Weight:
- 4.40 LBS
- Minimum Purchase:
- 1 unit
Description
Photoelectric Sensor, Infrared Energy Radiated, HMD Water Cooled, Lowest Temp 450C, Voltage Output
Features Include:
- Narrow-view and Wide-view types available
- High performance detection of low temperature steel
- Performance comparable to full size HMDs
- Optional airless dust hoods and air purge hoods available
- Type: Narrow view type
- Detection Method: Radiation detection
- Power Supply: 100-110VAC/200-220VAC ±10% ± 50/60Hz
- Power Consumption: 4W or less
- Operation Mode: Light ON
- Detection Object Temperature: 450°C or higher (standard steel material)
- Response Time: 25ms or less
- Indicator: Light reception indicator (red LED)
- Sensitivity Adjustment: Adjustable with volume
- Ambient Temperature:-10C to 55C (below 150 C with water cooling)
- Ambient Humidity: 35-85%RH (non-freezing, non-condensing)
- Insulation Resistance: 500 VDC 20MΩ or more (between primary side of transformer/output terminal and case)
- Dielectric Withstanding: 1.5 kVAC for 1 minute (between primary side of transformer/output terminal and case)
- Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
- Shock: 500 m/s2 / twice each in 3 directions
- Case Material: Aluminum die cast
- Connection: Terminal block (cable opening : Ground hub)
Output Mode:
- Relay output
- Rating: 1c 200 VAC 0.5A or less resistive load
Cooling Water Specification:
- Flow Rate: 2L/minute or more
- Temperature:10°C - 35°
- Withstand Voltage: 0.3MPa