Morgan Spano on Jul 24, 2020
Dart Controls
SA-STOK-WO
5K Ohm Speed Pot Kit, 8.75" Leads, Knob, & Dial, Use When You Need an Input Device to Set Speed in VFD Applications, Ideal for Panel Mounting
$36.00
**Tariff Update: Select Manufacturer Tariffs Will Begin on April 14th, 2025** Read the latest!
ODV-3-420240-101A-MN
Alt: Optidrive Eco Series
$2,136.00
VFD, 7.5hp, 5.5kW, 24A, 200-240V, Single Phase Input/3 Phase Output, TFT Keypad, No EMC Filter, No Internal Brake Transistor, NEMA 4X, IP66 Outdoor Non-Switched, ModbusRTU/BACnetMS/TP, OptiDrive™ Eco, Frame 4: 14.2 x 9.5 x 10.7", 360 x 240
- Weight:
- 27.00 LBS
- Minimum Purchase:
- 1 unit
Description
Our Invertek Eco Optidrive is our pump control drive that offers energy efficient pumping with Optiflow.
This is your drive for fan and pump applicatioons!
The Eco series use film capacitors which do not allow derating for single phase operation. If you need advanced pump features with single phase input over 3hp we can apply eco firmware to the P2 series drives and run those on single phase. This must be done prior to shipping and will need to be noted on your order.
Features of this series:
- Available from 1 to 400 hp, from 200 to 600 volt in single or 3 phase input
- Eco vector motor control
- BACnet is built-in as standard
- Internal EMC filter
- Optiflow Multiple Pump Control
- Flexible pump station control with no PLC or pump control units (standard feature on this series)
- Low harmonic design - EN 61000-3-12 compliant, low noise operation
Marshall Wolf Automation is your authorized Invertek distributor!
Specifications
Horsepower
7.5 hp
Housing/Enclosure
NEMA 4/4X (IP66)
Input Phase
Single Phase
Input Voltage
200-240V, Single Phase
Outdoor Rated
Yes
Output
3 Phase Output
Series
Optidrive Eco Series
Options
Enclosed, Keypad
STO (Safe Torque Off)
Yes
Torque Load
Constant/Variable (CT/VT)
Drives - Type of Drive
General Purpose
Warranty
3 Years
Alternate Part Number
Optidrive Eco Series
Weight
27
Width
14
Length/Depth
18
Height
15
Features Include:
- Supply Voltage: 200-240 V
- Output Current: 24 A
- Input Phases: 1
- Supply Current Continuous: 55 A
- Supply Fuse or MCB (Type B): 80 A
- Motor Output Rating: 5.5 kW (7.5 HP)
- Output Voltage: 0 – Supply Voltage
- Output Current: 24 A
- Size: 4
- Height: 360 mm (14.17 in)
- Width: 240 mm (9.45 in)
- Depth: 261 mm (10.28 in)
Control Method:
- Eco Sensorless Vector
- Open Loop Permanent Magnet Vector
- Open Loop BLDC Vector
- Open Loop Synchronous Reluctance Vector
Downloads
- Invertek ODV-3-420240-101A-MN Datasheet
- Invertek High Power VFDs for Single Phase Supplies Flyer
- Invertek Eco Optidrive Pump Control Brochure
- Invertek Eco Optidrive AC Variable Speed Drive User Guide
- Invertek Eco Optidrive AC Variable Speed Drive Advanced User Guide
- Invertek VFDs for Fan & Pump Applications Technical Specification
- Invertek Marine Equipment Control Catalog
- Invertek Combustion Air Fan Control Flyer
- Invertek Combustion Air Fan Control Brochure
- Invertek Reducing Total Harmonic Distortion with VFDs Brochure
- Invertek OptiTools Studio User Guide
- Invertek Stock Drives Catalog
Accessories
Available Now!
Available Now!
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Invertek
OPT-3-STICK-IN
Bluetooth Communication/Rapid Communication Tool, Use with Invertek E3, P2 and Eco Drives, Use to Copy Parameters Between Drives, Copy/Backup/Restore, Provides Bluetooth Wireless Interface to PC/Phone
$144.00
Blogs
Read More