HB0404
Alt: HB Series
$3,342.17
Motor, 40hp, 1800rpm, 324T Frame, 46.3FL A (460V) 460V, MAX-E2/841®, NEMA Premium TEFC
- Weight:
- 740.00 LBS
- Minimum Purchase:
- 1 unit
Description
TECO-Westinghouse manufacturers motors, variable frequency drives and soft starters.
In 1995 TECO acquired all Westinghouse Electric Corp. shares and in 1997 the name was officially changed to TECO-Westinghouse Motor Company (TWMC). They are headquartered in Round Rock, Texas.
After acquiring Motovario, TECO also has a line of gearmotors.
Series Features Include:
- Output: 40 HP
- Speed: 1800 RPM
- Voltage: 460 Volts @ 60 Hz
- Frame: 324T
- Full Load Efficiency: 94.1%
- Full Load Power Factor: 86%
- Full Load Amperage: 46.3A
- Enclosure: Totally Enclosed Fan Cooled (IP56)
- Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz)
- Meets or Exceeds IEEE 841 Standards
- Meets IEEE 45 Marine Duty and ABS Design Assessment up to 150 HP
- Extended Warranty: 60 Months from Date of Manufacture
- Insulation: Class F
- Temperature Rise: Class B
- NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
- Construction: Cast Iron Frame
- End Brackets & Fan Cover and Main Conduit Box
- (F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box.)
- Grounding Terminal: Inside Main Conduit Box with additional Foot Grounding Provision
- Conduit Box: Oversized and Rotatable in 90 Degree Increments - F1 Mounted
- Ambient Temperature: Designed for 50°C
- Elevation: Designed for 3300 ft.
- Rotation: Bi-Directional; Except 2 Pole "Hybrid" and F# 5000 and Larger Ratings are Counter-Clockwise facing the DE
- Shaft: 1045 Carbon Steel
- Rotor Construction: Aluminum Die Cast Squirrel Cage for F# 140T - 449T
- Rotor Construction: Copper/Copper Alloy for F# 5000 and Larger
- (F# 5007 - 5011 8 Pole Ratings are Aluminum Die Cast Squirrel Cage Rotor Construction)
- Paint System: 2 Part Epoxy
- Paint Color: Blue - Munsell 5PB 3/8
- Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease
- Automatic Grease Discharge Fittings
- VBXX INPRO™ Seals Installed on Both Ends
- Stainless Steel Nameplate and Hardware
- Stainless Steel Automatic Breather Drain
- Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1 Part 30(4 & 5)
- Inverter Duty Speed Range: 20:1 Variable Torque / 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
- 3 Leads Only
- Dual Drilled Feet Available on Most Ratings - Longer Frames (i.e. 145T Drilled also for 143T)
- Vibration Not to Exceed 0.08 Inches Per Second
- Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded