Product image is representative only, please verify specifications.
HB0014
Alt: HB Series
$609.12
Motor, 1hp, 1800rpm, 143T Frame, 1.5 FL A (460V), 460V, MAX-E2/841®, NEMA Premium TEFC
- Weight:
- 58.00 LBS
- Minimum Purchase:
- 1 unit
Configure Your Optimal AC Drive Solution
Build a complete solution with expert guidance on AC drives and compatible components including motors, circuit breakers and protection equipment
Configure Your Motor Starter Solution
Configure your DOL motor starter solution with guided selection of protection and control components: starters, contactor, relays and accessories
Description
TECO-Westinghouse manufacturers motors, variable frequency drives and soft starters.
In 1995 TECO acquired all Westinghouse Electric Corp. shares and in 1997 the name was officially changed to TECO-Westinghouse Motor Company (TWMC). They are headquartered in Round Rock, Texas.
After acquiring Motovario, TECO also has a line of gearmotors.
Specifications
Frame
143T
Horsepower
1 hp
Mounting
Footed, C Face
Motor Type
TEFC, Cast Iron
Phase
Three Phase
All - Specific Ratings
NEMA Premium
RPM
1800
All - Voltage
460/480VAC
Warranty
3 Years
Alternate Part Number
HB Series
Series
HB Series
Weight
58.0000
Series Features Include:
- Output: 1 HP
- Speed: 1800 RPM
- Voltage: 460 Volts @ 60 Hz
- Frame: 143T
- Full Load Efficiency: 85.5%
- Full Load Power Factor: 73%
- Full Load Amperage: 1.5A
- Enclosure: Totally Enclosed Fan Cooled (IP56)
- Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz)
- Meets or Exceeds IEEE 841 Standards
- Meets IEEE 45 Marine Duty and ABS Design Assessment up to 150 HP
- Extended Warranty: 60 Months from Date of Manufacture
- Insulation: Class F
- Temperature Rise: Class B
- NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
- Construction: Cast Iron Frame
- End Brackets & Fan Cover and Main Conduit Box
- (F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box.)
- Grounding Terminal: Inside Main Conduit Box with additional Foot Grounding Provision
- Conduit Box: Oversized and Rotatable in 90 Degree Increments - F1 Mounted
- Ambient Temperature: Designed for 50°C
- Elevation: Designed for 3300 ft.
- Shaft: 1045 Carbon Steel
- Rotor Construction: Aluminum Die Cast Squirrel Cage for F# 140T - 449T
- Rotor Construction: Copper/Copper Alloy for F# 5000 and Larger
- Paint System: 2 Part Epoxy
- Paint Color: Blue - Munsell 5PB 3/8
- Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease
- Automatic Grease Discharge Fittings
- Stainless Steel Nameplate and Hardware
- Stainless Steel Automatic Breather Drain
- Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1 Part 30(4 & 5)
- Inverter Duty Speed Range: 20:1 Variable Torque / 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
- 3 Leads Only