Dart Controls
SA-STOK-WO
5K Ohm Speed Pot Kit, 8.75" Leads, Knob, & Dial, Use When You Need an Input Device to Set Speed in VFD Applications, Ideal for Panel Mounting
$35.00
Product image is representative only, please verify specifications.
FRN001AR1L-2U
Alt: Engineered for Fans & Pumps, FRENIC-HVAC
$709.20
HVAC VFD, 208-230VAC, 3 Phase: 1hp, 5A or Single Phase: 0.25hp, 1.9A, NEMA/UL 12 Enclosure, DC Reactor, EMC Filter, 18.3H x 5.91W x 10.3D"
- Weight:
- 29.70 LBS
- Minimum Purchase:
- 1 unit
Description
The Fuji FRENIC-HVAC series is an HVAC drive that has a long list of HVAC application and maintenance features included standard.
In the manufacturing sector, fans use about 78.7 billion kilowatt-hours of energy each year. This represents 15 % of the electrical energy consumed in Industry. In the commercial sector, similar usage of electrical energy is needed to operate fan motors for space conditioning.
Motor loads often vary according to cyclical production demands, environmental conditions, changes in customer requirements and seasonal changes.
It makes sense to adjust motor operating speed to demands of the load. Would you regulate your car’s speed with just the brakes?
Varying load applications like centrifugal pumps and fans in particular benefit from ASDs. For example, when pump speed can be cut in half, resulting power consumption is reduced by a factor
of eight!
The FRENIC-HVAC drives have a 3 year warranty.
Capacity range:
- 1 to 125hp at 208VAC
- 1 to 1000hp at 460VAC
- 1 to 300hp at 575VAC
Marshall Wolf Automation is your authorized Fuji distributor!
Series Features Include:
- Control: V/F Control, Torque Vector Control
- Rated Output Frequency: 50/60Hz
- Protection Ratings: IP21/ IP55, NEMA/UL TYPE 1, NEMA/ UL TYPE 12
- Built-In Modbus RTU/BACNet MS/TP/Metasys N2, EMC Filter and DCR
- Available UL Type 1 and Type 12 Models
- Removable Control Terminal Block
- CE Filter Built-In for All Models
- Real Time Clock
- 4 PID Controller
- Fire Mode
- Filter Clogging Prevention
- Built-In USB Port
- Nickel (Ni) & Tin (Sn) Plated Bus Bars
- Conformal Coated PCBs
- Cooling Fan Board Coating + Anti-Rust Protection
- Filter Clogging Prevention/Reversing Operation
- Wet-Bulb Temperature Presumption Control
- Selectable “Light” Alarms
Technical Information:
- Fuji FRENIC-HVAC Datasheet
- Fuji FRENIC-HVAC Brochure
- Fuji FRENIC-HVAC Catalog
- Fuji FRENIC-HVAC Specification Sheet
- Fuji FRENIC-HVAC General Specification Sheet
- Fuji FRENIC-HVAC Engineering Specification Sheet
- Fuji FRENIC-HVAC Instruction Manual
- Fuji FRENIC-HVAC User Manual
- Fuji FRENIC-HVAC Quick Reference Guide
- Fuji Inverter TP-A1 Multi-Function Keypad Instruction Manual
- Fuji FRENIC-HVAC Engineered for Fans & Pumps Presentation
Option Card and Communication Manuals:
- Fuji FRENIC-HVAC / AQUA RS-485 User’s Manual
- Fuji FRENIC-HVAC / AQUA Loader Instruction Manual
- Fuji FRENIC-HVAC / AQUA OPC-ETH Multiprotocol Ethernet Interface Brochure
- Fuji FRENIC-HVAC / AQUA OPC-ETH Multiprotocol Ethernet Interface Instruction Manual
- Fuji FRENIC-HVAC / AQUA OPC-ETH Multiprotocol Ethernet Interface Quick Installation Guide
- Fuji OPC-PRT2 PROFINET IO Interface Brochure
- Fuji OPC-PRT2 PROFINET IO Interface User Manual
Application Notes:
Accessories
Available Now!
Available Now!
Available Now!
Available Now!
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
$41.25
$254.99
$624.75
$735.00
$132.30
$139.65
$69.83
$198.45
$191.10
$720.30
Fuji Electric
OPK-BP
Real Time Clock Backup Battery, Recommended Replacement Interval is Every 5 Years
$44.10
$955.50
$27.50
$34.38