Takex
F70WPN
Fiber Optic Sensor, Through Beam, PNP, Digital Display, White LED, Cable, Run/Select/Teach
$171.49
F70W
Alt: Available Only While Factory Stock Lasts!
$171.49
Fiber Optic Sensor, Digital Display, NPN, White LED, 2m Cable, 12-24VDC, IP40
- Weight:
- 0.25 LBS
- Minimum Purchase:
- 1 unit
Description
Fiber Optic Sensor, Digital Display, NPN, White LED, 2M Cable, 12-24VDC, IP40
Features Include:
- Digital indication of sensing information
- Various advanced functions provide for optimum use of the sensor
- Unparalleled "high resolution" allows highly accurate detection
- Readily visible backlight LCD
- Detection Method: Through beam type, reflective type (Dependent on fiber optic cable)
- Detecting Distance: Dependent on fiber optic cable
- Power Supply: 12 - 24V DC ±10% / Ripple 10% or less
- Current Consumption: 30mA or less
- Output Mode: PNP Open Collector Output Rating: Sink current 100mA (30VDC) or less
- Operation Mode: Light ON/Dark ON selectable
- Response Time: 500μs or less
- Hysteresis: Up to 10% of detecting distance
- Light Source: White LED
- Switch: 2 set buttons / Mode selector switch: RUN/SELECT/MODE
- Sensitivity Setting: Full auto teaching / Auto teaching
- Sensitivity Setting Input: Set button input/external input
- Sensitivity Adjustment Function: Provided (manual sensitivity adjustment)
- Material: Polycarbonate
- Connection: Attached cable (outer diameter: 4.8mm) 0.2mm2, 5 cores, 2m
Output Mode:
- Control Output: Open collector output / Rating: Source current 100 mA (30 VDC) or less / Residual voltage: 1 V or less
- Stability Output: Open collector output / Rating: Source current 50 mA (30 VDC) or less / Residual voltage: 1 V or less
Functions:
- Sensor function: AUTO/TEACH/LOCK
- Auxiliary function: S for manual adjustment of sensitivity and activation level, H for manual hysteresis setting, V for gap indication and absolute value indication modes
- Mutual Interference prevention feature
- Self-diagnosis feature
- Short circuit protection feature
Timer:
- On delay/off delay/on off delay/disabled selectable
- Delay time: selectable between 10, 20, 40, 60, 80, 100 and 120 ms
- Default: 40 ms
Response Time:
- Light emission frequency channel 1: 500 μs or less
- Light emission frequency channel 2: 600 μs or less
Indicator:
- Orange LED: Operation Indicator
- Green LED: Stability Indicator
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.