Product image is representative only, please verify specifications.
SCE-10106SC
Enclosure (SC) with Screw Cover, 10.13 x 10 x 6" HWD, 0.063" Carbon Steel, ANSI-61 Gray, NEMA/UL 3R, 4, 12, NEMA 13, IP66, Screw Cover (SC) Enclosure
- Weight:
- 13.20 LBS
- Minimum Purchase:
- 1 unit
Saginaw specializes in standard stock and custom designed enclosures that are manufactured in Saginaw, Michigan
Saginaw manufacturers carbon steel, stainless steel and non-metallic enclosures. They specialize in NEMA 1, 3, 3R, 4, 4X and 12.
- Modular enclosures
-
- Endless combinations, multiple door arrangements, up to ten
- Modular units work around each other for users to interact with them and equipment they hold
- Wall mount enclosures
- Generally the most expensive group
- Indoor or outdoor options
- Available as pushbutton enclosures up to large electrical requirements
- Free-standing and floor-mounted enclosures
- Mostly used outdoors and needing multi-door
- Generally used for a large amount of electical components, single or multiple door
- Non-Metallic enclosures
- Includes fiberglass, polycarbonate
- Used to protect from corrosion, UV rays or very damp conditions
- Allows windowed or windowless
- Includes pushbutton, junction, wall-mount and many other options
- Operator system enclosures
- Each enclosure allows a user to work with a computer or their instruments, accessibility is the key feature.
Marshall Wolf Automation is your authorized Saginaw distributor.
Larger enclosures will drop direct to you from Michigan.
Features Include:
- 0.063 In. carbon steel
- Seams continuously welded and ground smooth, no holes or knock-outs
- Captivated cover screws thread into sealed wells
- Pour in place oil & water resistant gasket
- 10-32 Standoffs provided for mounting optional panels
- Height: 10.13"
- Width: 10.00"
- Depth: 6.00"
- Est. Ship Weight: 11.00 lbs
*Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.
Need More Information?
Read more about Enclosures here!