8802100200
Alt: TL400-I, Alternative for 8802100120, TL400-V
Industrial Level Sensor, 4-20mA O/P, 150mm Cable with M12 4-Pin Male Connector, Mobile Device + SigNow Mobile App (Android and iOS), 8-33VDC, 4m Measuring Range, -20 to +80°C (-4 to +176°F) Operating Temp., Ø66 x 31mm, SAE 5 Bolt Hole, IP68
- Weight:
- 0.30 LBS
- Minimum Purchase:
- 1 unit
Non-Intrusive Level Sensor
The TL400-I is a non-intrusive level and volume sensor that is ideal for detecting liquids, grains, fluids and bulk solids in static or moving applications.
With a low-power laser beam, it performs several measurements per second while an advanced algorithm calculates not only the exact level, but also convert to volume and distance in several units.
It can be parameterized by a configurator app via Bluetooth. With this feature is possible to save customized points and get accurate measurement even in irregular tanks.
Setting up without the need for cables
These capabilities alone are already a big difference in this non-intrusive level sensor. But the TL400-I still has an almost unprecedented feature: there is no need for cables for its configuration. This non-intrusive level sensor features Bluetooth Low Energy (BLE) communication for configuration. Therefore, it can be configured using the NOVUS SigNow software, which has a mobile version, enabling configuration and data reading with a mobile phone.
- Bluetooth technology allows the TL-400-I to be configured without the need to be close to the location where it is installed, facilitating handling in cases where the sensor is in a difficult to access location. In the case of irregular tanks, the settings allow customization of up to 20 points, making it possible to linearize the level of any type of reservoir.
- Level measurement in pressurized environments
- Fully protected against dust and prolonged immersion
- Ease of local diagnosis via app
- Suitable for irregular tanks
- Designed for measuring liquid levels in tanks under agitation
Specific specs:
- Measuring Range: Up to 4 m
- Measurement Accuracy: ± 3 mm
- Output Signal: 4 to 20 mA
- Connector Type: 150 mm cable with M12 4-pin male connector
- User Interface: Mobile Device + SigNow Mobile App (Android and iOS)
- Power Supply: 8 to 33 Vdc
- Power Consumption: < 70 mA @ 12 Vdc or < 40 mA @ 24 Vdc
- Electrical Protection: Against reverse polarity
- Operating Temperature: -20 to 80 °C (-4 to 176 °F)
- Dimensions: Ø66 x 31 mm
- Mounting Pattern: SAE 5 Bolt Hole
- Housing Protection Rating: IP68