267075-100425

267075-100425

Alt: OBG5000-R102-2EP-IO-V31, This is the Recommended Replacement for 207107

$164.01

Photoelectric Retroreflective Sensor with Polarization Filter for Clear Object Detection, Returns of This Item Must Be Approved by Manufacturer

Minimum Purchase:
1 unit
Adding to cart… The item has been added
Description

Pepperl+Fuchs R10x and R20x series offer standard housings and maximum performance in a space-saving housing. 

  • Both R10x and R20x offer IO-Link, DuraBeam and MPT 
  • R10x - small housing design
  • R20x - medium housing design, also offers extended detection and sensing ranges as well as swiveling plug for more flexibility

DuraBeam laser technology and Multi Pixel Technology (MPT) offer long life, sharp light spot and higher temperature ranges!

DuraBeam

Eye-safe DuraBeam combines the advantages of an LED emitter (long service life and extended temperature ranges) with the strengths of laser diodes (long detection and sensing ranges).

This makes both the R10x and R20x series more energy efficient without compromising performance... even in extreme operating temperatures.

DuraBeam also has a special beam profile which casts a sharp, circular light spot on an object. This makes them ideal for extremely precise detection and distance measurement of small objects.

MPT (Multi Pixel Technology)

MPT uses the advantage of geometric triangulation for distance measurement which gives you highly precise, reliable measurement even at a close range. R10x and R20x sensors can precisely measure the position of an object and clearly distinguish it from the background.

 

Features Include:

  • Effective detection range: 0 - 3.5 m in TEACH mode ; 0 - 5 m at switch position "N"
  • Reflector distance: 0 - 3.5 m in TEACH mode ; 0 - 5 m at switch position "N"
  • Threshold detection range: 6 m
  • Reference target: H85-2 reflector
  • Light source: LED
  • Light type: modulated visible red light
  • LED risk group labelling: exempt group
  • Diameter of the light spot: approx. 170 mm at a distance of 3.5 m
  • Opening angle: approx. 5°
  • Operating voltage: 10 - 30 V DC
  • Ripple: max. 10 %
  • No-load supply current: < 25 mA at 24 V supply voltage
  • Switching type The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
  • Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
  • Switching voltage: max. 30 V DC
  • Switching current: max. 100 mA , resistive load
  • Housing width: 13.9 mm
  • Housing height: 41.4 mm
  • Housing depth: 18.3 mm
  • Degree of protection: IP67 / IP69 / IP69K
  • Connection: M8 x 1 connector, 4-pin