Multifunctional Gate Box Locking Module, Guard Locking with Guard Lock Monitoring, E-Stop and 1 Illuminated Pushbutton with Lens Set No. 12044 (6 Pieces, 5 Colors) plus Key-Operated Switch (form V, 40°), Cable Entry, Unicode, IP54, Can be C
The Euchner CET series is used to guard lock for perseonnel protection in accordance with EN 14119.
This series offers very high guard locking of up to 6500N, 2 safety outputs, a head that can be rotated in 90° steps and it is IP67 rated. The metal housing and safety category 4 and PL e according to EN ISO 13849-1 make this the right safety switch for you!
CET-AP - Single device
Safety switch with guard locking and safe guard lock monitoring
Integrated CES-AP electronics
No special evaluation unit required
Safety category 4 and PL e in accordance with EN ISO 13849-1 with any mounting position, head down/up/horizontal
Two safe semiconductor outputs and signal output OUT
Safety outputs with clocking
Input (optional) for connection of feedback loop and start button
CET-AR - For connection of up to 20 AR devices
Safety switch with guard locking and safe guard lock monitoring
Integrated CES-AR electronics
No special evaluation unit required
Series connection of up to 20 devices (CES-AR, CET-AR, MGB-AR, ...) in an AR chain possible
Safety category 4 and PL e according to EN ISO 13849-1 with any mounting position, head down/top/level
Two safe semiconductor outputs and signal output OUT
Safety outputs with clocking
Input (optional) for connection of feedback loop and start button
CET-AS - For direct connection to AS-Interface
ntegrated AS-i connection
Robust metal housing
Suitable for heavy doors
High tamper resistance
High protection class IP67
Detailed diagnosis with four LEDs (ASi/STATE, 2 colors each)
Features Include:
Guard locking with guard lock monitoring
Can be connected in series with other AR devices (e.g. CES-AR and CET-AR)
Mechanical life: 1 x 106, In case of use as door stop, and 1 Joule impact energy 0,1 x 106
Installation orientation: Door hinge DIN right
Switching frequency: 0.25 Hz
Connection Cable entries: M20x1.5
Guard locking principle: Closed-circuit current principle
Locking force FZh: 2000 N
Utilization category (acc. to EN 60947-5-2): DC-13 24V 200mA
Rated insulation voltage: Ui 30 V
Rated impulse withstand voltage Uimp: 1.5 kV
Connection cross-section: (Rigid/flexible) 0.13 - 1,5 mm², (Rigid/flexible) with cable end sleeve according to DIN 46 228/1 0.25 - 1,5 mm², (Rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1 0.25 - 0,75 mm²
