Multifunctional Gate Box Locking Module, Guard Locking with Guard Lock Monitoring (Switched Off), E-Stop and 1 White Illuminated Pushbutton, 6 Piece Lens Set, Cable Entry, Unicode, Includes Adhesive Label, Can be Connected in Series with ot
The Euchner CET series is used to guard lock for perseonnel protection in accordance with EN 14119.
This series offers very high guard locking of up to 6500N, 2 safety outputs, a head that can be rotated in 90° steps and it is IP67 rated. The metal housing and safety category 4 and PL e according to EN ISO 13849-1 make this the right safety switch for you!
CET-AP - Single device
Safety switch with guard locking and safe guard lock monitoring
Integrated CES-AP electronics
No special evaluation unit required
Safety category 4 and PL e in accordance with EN ISO 13849-1 with any mounting position, head down/up/horizontal
Two safe semiconductor outputs and signal output OUT
Safety outputs with clocking
Input (optional) for connection of feedback loop and start button
CET-AR - For connection of up to 20 AR devices
Safety switch with guard locking and safe guard lock monitoring
Integrated CES-AR electronics
No special evaluation unit required
Series connection of up to 20 devices (CES-AR, CET-AR, MGB-AR, ...) in an AR chain possible
Safety category 4 and PL e according to EN ISO 13849-1 with any mounting position, head down/top/level
Two safe semiconductor outputs and signal output OUT
Safety outputs with clocking
Input (optional) for connection of feedback loop and start button
CET-AS - For direct connection to AS-Interface
ntegrated AS-i connection
Robust metal housing
Suitable for heavy doors
High tamper resistance
High protection class IP67
Detailed diagnosis with four LEDs (ASi/STATE, 2 colors each)
Features Include:
Connection cross-section: (rigid/flexible) 0.13 - 1.5 mm² / (rigid/flexible) with cable end sleeve according to DIN 46 228/1 0.25 - 1.5 mm² / (rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1 0.25 ... 0.75 mm²
Degree of contamination (external, according to EN 60947-1): 3
Discrepancy time between FO1A and FO1B: max.: 10 ms
Rated impulse withstand voltage Uimp: 1.5 kV
Rated insulation voltage Ui: 30 V
Risk time according to EN 60947-5-3 max.: 350 ms
Safety class: III
Transponder coding: Unicode
Utilization category DC-13: 24V 200mA
Controls and indicators
Breaking capacity max.: 0.25 W
LED power supply: 24 V DC
Switching current: 1 - 10 mA
Switching voltage: UA V
Emergency stop
Breaking capacity max.: 0.25 W
LED power supply: 24 V DC
Switching current: 1 - 100 mA
Switching voltage 5 - 24 V
Monitoring outputs OD, OT, OL, OI
Output current max.: 50 mA
Output type: Semiconductor outputs, p-switching, short circuit-proof
Output voltage: UA-2V - UA V DC
Safety outputs FO1A, FO1B
Output current per safety output FO1A / FO1B: 1 - 200 mA
Output type Semiconductor outputs, p-switching, short circuit-proof
Output voltage: UFO1A /UFO1B HIGH UB-2V - UB V DC / UFO1A /UFO1B LOW: 0 - 1 V DC
Power supply UA
Current consumption IUA max.: 375 mA
Operating voltage DC: UA 24 V DC -15% - +10%
Power supply UB
Current consumption IUB max.: 80 mA
Operating voltage DC: UB 24 V DC -15% - +10%
Mechanical values and environment
Ambient temperature at UB 24V DC: -20 - +55 °C
Connection Cable entries: M20x1.5
Degree of protection: IP65
Guard locking principle: Open-circuit current principle
