Weg
00118OT1B56C-S
Motor, 1hp, 1800rpm, 4 Pole, 56C Frame, Single Phase, 115/208-230V, 60Hz, NEMA MG-1, Rolled Steel, IC01 ODP, Footed/C Flange, F-1 Mounting, No Terminal Box
$336.75
01518ET3EHW254TC-S
Alt: 15228482
$3,619.50
Motor, 15hp, 1800rpm, 4-Pole, Three Phase, 230/460//190-220/380-415V, 60//50Hz, 254/6TC Frame, TEFC, Wash Down HydroWash NEMA Premium Efficiency White Epoxy Rolled Steel, Footed, C Face, F-1 Mounting, Left Position Terminal Box, IP56
- Weight:
- 243.00 LBS
- Minimum Purchase:
- 1 unit
Description
The WEG Hydrowash series was designed for applications where there is a constant need for hygiene and cleanliness of the environment through high pressure water jets and/or chemical products.
This is a general purpose, 3 phase wash down duty motor!
Washdown motors are applied in food, beverage and pharmaceutical industries.
Standard Features:
- Output: 1/2 up to 25 HP
- Frames: 56 up to 254/6T
- Number of poles: 2 up to 6
- Certification CSA/UL
- Efficiency: NEMA Standard and NEMA Premium
- Voltage: Frames 56 and 145T - 208-230/460 V with 9 leads Frames 182/4T and 213/5T - 208-230/460//190-220/380-415 V with 9 leads Frames 254/6T - 208-230/460//190-220/380-415 V with 12 leads
- Service factor: 1.15
- Mounting: F-1
- Insulation class “F” (ΔT 80 K)
- Degree of protection: IP56
- Shaft material: Stainless Steel (AISI 304)
- Bearing type: Shielded (2RS)
- Permatex on joints for frames 182/4T and above
- Viton O’Ring on joints for frames 56 and 145T
- Color: Porcelain White - Munsell N 9.5
- Coating NOBAC® for frames 180 and above
- Internal painting: Tropicalized (Epoxy for frames 180 and above)
- Breather on non-drive end shield
- Vibration: Grade A
- Drive end bearing seal: Frames 56 and 145T - Oil seal stainless steel spring + slinger (stainless steel) Frames from 182/4T and above - Oil seal stainless steel spring + slinger (stainless steel)
- Non drive end bearing seal: Frames 56 and 145T - Oil seal stainless steel spring Frames from 182/4T and above - Oil seal stainless steel • Type of grease: Mobil Polyrex EM
- Fan material: plastic
- Aluminum flanges
- Terminal box material: Aluminum
- External screws and key: Stainless Steel
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
$9.20
Weg
00212OT3E184TC-S
Motor, 2hp, 1200rpm, 230/460//190-220/380-415V, 182/4TC, NEMA Premium Efficiency, Footed/C-Face, Rolled Steel
$476.25
Weg
00318OT3ER182TC-S
Motor, 3hp, 1800rpm, 3 Phase, 4-Pole, 230/460//190-220/380-415V, 60//50 Hz, 182/4TC Frame, NEMA Premium Efficiency IC01 - ODP, Footless/C Face, Rolled Steel
$465.00
Weg
00312ET3E213TC-S
Motor, 3hp, 1200rpm, 3 Phase, 208-230/460V, 213/5TC, NEMA Premium Efficiency TEFC, Footed/C Face, Rolled Steel
$771.00
Weg
01536ET3E254T-S
Motor, 15hp, 3600rpm, 3 Phase, 208-230/460V, 254/6T, NEMA Premium Efficiency TEFC, Footed/No Flange, Rolled Steel
$1,191.75
Weg
00212OT3ER184TC-S
Motor, 2hp, 1200rpm, 6 Pole, 182/4TC Frame, Three Phase, 230/460//190-220/380-415V, 60//50Hz, Rolled Steel NEMA Premium Efficiency, IC01 ODP, Footless/C Flange, W-6 Mounting, Left Position Terminal Box, IP20
$488.56
Weg
01018OT3E215T-S
Motor, 10hp, 1800rpm, Three Phase, 208-230/460V, 213/5T, NEMA Premium Efficiency ODP, Footed/No Flange, Rolled Steel, (Cannot Ship UPS, Drop Ship Only via Truck)
$826.50
Weg
00712OT3E254T-S
Motor, 7.5hp, 1200rpm, 3 Phase, 208-230/460V, 254/6T, NEMA Premium Efficiency ODP, Footed/No Flange, Rolled Steel
$1,100.25